USB-RS485-WE-1800-BT - Cable, USB to RS485, Serial Converter, 1.8m
6ft Usb-rs485-1800-bt Ft232 Usb Rs485 6 Core Wire End Cable FT232R USB RS485 Converter,Panel Mount FTDI USB to RS485 Cable Converter
CABLE; ASSEMBLY; USB-RS485; 6 COND.; 26AWG; 5V; USB-A PLUG; STRIPPED WIRE END; 1.8M 6FT
The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals. It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols. The cable provides a fast, simple way to connect devices with RS485 interface to USB. It contains small internal electronic circuit board utilising the FT232R which is encapsulated into USB connector at one end of cable. The other end of the cable is bare, tinned wire ended connections. The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable. The USB side of cable is USB powered and USB 2.0 full speed compatible.
- Black cable and transparent USB connector
- 26AWG, 6 core cable
- Cable length of 1.8m (6feet)
- Diameter of 5mm
- FCC and CE compliant
- Support for FT232R FTDIChip-ID feature for improved security
- Maximum UART baud rate of 3Mbaud
- Internal EEPROM with user writeable area
- EIA/TIA-485 communication interface with low power requirements
- Operating temperature range from -40°C to 85°C
Communications & Networking, Industrial
|Current Rating||250 mA|
|Input Type||USB Protocol|
|Number of Channels||1|
|Special Features||Low USB Bandwidth Consumption, USB 2.0 Full Speed Compatible, Internal EEPROM with User Writeable Area, Entire USB Protocol Handled by the Electronics on the PCB|
|Cable Length||5.9' (1.8m)|
The USB-RS485-WE-1800-BT_0.0 is a 1.8m long USB to RS485 converter cable.
Using the FT232R chip combined with an RS485 level converter, the cable is a CE and FCC approved product which is one of the simplest USB - RS485 solutions around.
Powered from the USB port, the RS485 signals are exposed on unterminated wires allowing the user to fit an appropriate connector matching their system needs.
The cable can be used with FTDI's drivers to provide a virtual COM port on a PC which is capable of communication rates with RS485 units from 300 baud up to 3 MBaud.
Data RX and TX LEDs visible through transparent moulding
cable clolour : black
ftdi usb rs485 cable, compatible usb rs485 we 1800 bt
half duplex, non isolated
Standard 10k pull up & down resistor, 120R terminal resistor
usb2.0 standard, full speed 12M support
On-board signals: Data+, Data-, VCC5V, GND
ft232rl chip for USB UART signals, and SP485LEEN for UART to RS485 signals shift
6 core, 26AWG, bare copper, PVC jacket, OD5.0mm
24AWG wire not suitable for RJ45/rj12 etc
1.8mtr in length
Compatible with ftdi usb-rs485-we-bt signals
The USB 2.0 to RS485 Cable provides a simple and easy to connect between the USB and RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS485 ports expansion via USB ports.
USB to RS485 industrial intelligent converter,no power supply needed,plug-and-play
USB485 is a kind of USB to RS485 industrial intelligent converter. It is the best solution for the communication between USB and RS485. Compared with RS232 to RS485 converter, USB to RS485 converter has many advantages.
RS-485 interfaces supported.
RS-485 interface DB PIN connector .
Maximum RS-485 cable length: 1200m
Transmission rate 300bps to 1Mbps.
Maximum number of devides in the RS485
network:Half Duplex to 32 devices
Remote wake-up and power supply management supported.
+/-15KV ESD Protect.
Direct USB power without external power supply.
Working environment: -40 deg.C to 85 deg.C, relative humidity 5% to 95%.
Windows95/98/2000/XP and NT-IMAG supported.