RS485 communication cable,telecommunication cable for communication network/
FTDI USB RS485 Adapter Cable RS485 to USB Converter
Product Description
FTDI USB RS485 CONVERTER CABLE, USB TO RS485 SERIAL WIRE END WIN8 WIN10 ANDROID
USB RS485 adapter
USB2.0. full speed 12M support
FT232 USB RS485 cable, signals compatible with USB-RS485-WE-1800-BT
With 2 LEDs for data+, data- transfering
Red-VCC(5v),Black-GND,White - Data+, Green - Data-
FT232RL + SP485LEEN chip
Support Android, Support Win 10, 8,8.1, Win 7, XP, 2000, Linux, Mac OS
Integrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5
Support FTDI VCP driver and D2XX driver
Half duplex, non-isolated
300 ~ 1Mbps baud rate
Up to 5km distrance transfering
1.8mtr in length.
ABS USB housing, openable for testing
100% double test
PE zipper lock bag for each
USB to RS485 serial port asynchronous working cable Photoelectric Isolation Converter/USB 2.0 to RS485/RS422 RS-485/RS-422 Serial Cable Converter/USB to RS-485/422 8 Ports Converter with Isolation(USB V2.0)/USB to RS485 Converter for Security System
Product Description
FTDI Chip usb to RS485 Cable with TX/RX LEDs, Wire End, 1.5m, USB-RS485-WE compatible
USB-RS485 converter cable provides a USB to RS485 serial interface with customized end connectors. Entire USB to RS485 translation protocol handled by the electronics over-molded in the cable
ESD Protection for RS-485 I/O's ±15kV Human Body Model (HBM) ±15kV EN61000-4-2 Air Gap Discharge ±8kV EN61000-4-2 Contact Discharge
EIA/TIA-485 communication interface with low power requirements. Overmolded FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions
Visual indication of Power and Tx/Rx data traffic via LEDs in the transparent USB connector
Please refer to the datasheet attached in "Technical Specification" section of this page for additional information
| Processor |
FTDI FT232RL |
| RS485 Interface |
Included screw terminal header / single wires |
| Fail-safe bias resistors |
Yes |
| USB interface |
Standard Type A Male |
| Ports |
1-port available for RS485 |
| Signals |
RS485, 2-wire half duplex: D+, D-, GND |
| Baud rate |
300-921.600bps (up to 3kbps by using alising) |
| TX / RX buffer size |
256 Byte Transmit Buffer / 128 Byte Receive Buffer |
1.USB-RS485 converter cable provides a USB to RS485 serial interface with customised end connectors.
2.Entire USB to RS485 translation protocol handled by the electronics over-molded in the cable.
3.Overmolded FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions.
4.UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
5.Internal EEPROM with user writeable area.
6.Data transfer rates from 300 baud to 3 Mbaud.
7.Visual indication of Tx and Rx traffic via LEDs in the transparent USB connector.
8.Extended temperature range (-40°C to +85°C).
9.Electronics available as separate PCB
Detailed Images
FAQ
| (Original in stock) Interface Modules RS-485 CONVERTER 485CON |
| CONVERTER USB TO RS-422/485 LOCK |
| High Quality RS485 to RS232 USB Converter |
| USB-RS485 Communications Module |
| touch screen 10.4"/65536 color TFT,USB download/print/U disk RS232 RS-232/422/485 RS-232/422/485 |
| USB to RS422 RS485 Industrial Photoelectric Isolation Converter Cable |
| 6ft USB to RS422 RS485 Serial Converter Adapter Cable w/ FTDI Chip for Windows Linux |
| USB to Serial Adapter (ATC-820) |
| RS232 to RS485 Converter for Security System |
| RS-232 to LAN Converter MOXA NPort Express DE-311 np5210 Moxa Device Server - NPort 5130 |
| (Original in stock) Interface Modules Wide-Temp RS-232 to RS-422/RS-485 Converter ADAM-4520I-AE |
| CONVERTER USB TO RS-422/485 |
| TTL-232R-5V-AJ Cable with audio jack connector with +5V based TX and RX signalling |
| RS232 to RS485 EIA/TIA USB fiber optic serial Adapter EA-01 |
| usb to rs485 rs422 Industrial Converter |
| FTDI Serial TTL-232 USB Cable |
| Industrial USB to RS485 cable Converter |
| Industrial Isolated Serial Converter RS-232 to RS-485 USB Converter for High Speed Dual-use |
Our Services |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| |
| |
|
| |
|
| |
|
| |
|
ftdi usb rs485 cable, compatible usb rs485 we 1800 bt
half duplex, non isolated
Standard 10k pull up & down resistor, 120R terminal resistor
usb2.0 standard, full speed 12M support
On-board signals: Data+, Data-, VCC5V, GND
ft232rl chip for USB UART signals, and SP485LEEN for UART to RS485 signals shift
6 core, 26AWG, bare copper, PVC jacket, OD5.0mm
24AWG wire not suitable for RJ45/rj12 etc
1.8mtr in length
Compatible with ftdi usb-rs485-we-bt signals
Detailed Images
Introduction
The USB 2.0 to RS485 Cable provides a simple and easy to connect between the USB and RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS485 ports expansion via USB ports.
USB to RS485 industrial intelligent converter,no power supply needed,plug-and-play
USB485 is a kind of USB to RS485 industrial intelligent converter. It is the best solution for the communication between USB and RS485. Compared with RS232 to RS485 converter, USB to RS485 converter has many advantages.
Product Features
RS-485 interfaces supported.
RS-485 interface DB PIN connector .
Maximum RS-485 cable length: 1200m
Transmission rate 300bps to 1Mbps.
Maximum number of devides in the RS485
network:Half Duplex to 32 devices
Remote wake-up and power supply management supported.
+/-15KV ESD Protect.
Direct USB power without external power supply.
Working environment: -40 deg.C to 85 deg.C, relative humidity 5% to 95%.
Windows95/98/2000/XP and NT-IMAG supported.
Introducing the 4FT USB to RS422 RS485 Converter Cable, the ultimate solution for seamless data communication between USB and RS-485/RS-422 interfaces. Designed with utmost precision and reliability, this converter cable is a must-have for professionals seeking efficient and secure data transfer.
With the ever-evolving technological landscape, the need for reliable and fast data communication has become paramount. Our USB to RS422 RS485 Converter Cable is engineered to meet these demands, providing a seamless bridge between USB and RS-485/RS-422 interfaces. Whether you are connecting industrial equipment, automation systems, or other devices, this converter cable ensures a smooth and uninterrupted data transfer process.
Featuring a high-quality USB interface, this converter cable guarantees a stable and secure connection to your computer or laptop. The USB interface is compatible with various operating systems, including Windows, Mac, and Linux, ensuring versatility and ease of use across different platforms.
The RS-485/RS-422 interface of this converter cable allows for long-distance data transmission, making it ideal for industrial applications. With its robust design and superior signal integrity, this converter cable ensures reliable data transfer even in harsh environments. Whether you are working in manufacturing, automation, or any other industry, this converter cable will provide you with the peace of mind you need for your critical data communication.
Furthermore, this converter cable is equipped with advanced features to enhance its functionality. It supports both half-duplex and full-duplex communication modes, allowing for flexible data transfer options. Additionally, it is designed to provide protection against voltage spikes and electrostatic discharge, ensuring the safety of your connected devices.
In conclusion, the 4FT USB to RS422 RS485 Converter Cable is a reliable and efficient solution for seamless data communication between USB and RS-485/RS-422 interfaces. With its high-quality construction, compatibility with various operating systems, and advanced features, this converter cable is the perfect choice for professionals seeking a secure and hassle-free data transfer experience. Invest in this converter cable today and unlock the true potential of your data communication.
){kind=link}
){kind=link}