Delay Protocol Airplay Wireless HDMI AV Transmitter and Receiver

• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Product Name: VGA Video Extender Kvm Extender Sender and Receive
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: extender
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

This HDMI KVM extender consists of low time-delay wireless HD audio video Transmitter(TX) and wireless Receiver(RX). TX is a wireless audio and video stream transmitting device. It can transmit the HD audio video stream( such as computer, Blue-ray, DVA, Game signal(Xbox, Playstation)) by Wifi format. RX is a wireless audio and video stream receiving device. It can receive the audio video stream signal by Wifi from TX, and play at time, display HDMI signal. And support USB/ IR return function between RX and TX.

 

Features:

 

1,Ultra low time-delay, professional testing the lowest time delay is 64ms. It is the lowest time-delay technology in the WiFi field.

2,Private codec algorithm, proprietary real-time image transfer protocol.

3,Private DSP, strong stability.

4,Support IR full frequency segment return 20KHz - 60KHz.

5,Support USB control. Can use keyboard and mouse to control device at the Receiver side. Wireless mouse and keyboard supported.

6,No interference, and the open environment, the image transmission distance can reach 150 meters under the same image quality level.

7,Automatic pairing, automatic search for small interference channel to connect.

8,Get Telec, CE, RED, FCC certification.

CAT5e VGA Extender 300M VGA Audio Video KVM Extender

300M VGA KVM Extender

VGA KVM Extender uses single UTP LAN cable CAT5e/6 to substitute VGA cable to achieve long-distance transmission.
The transmission distance extends up to 300 meters under 1920*1200@60Hz. Support EDID pass though, best compliant with different display devices.

Specification:

 

Product pannel:

Connection Diagram:

 

 

Made in China 60m RX TX HDMI Extender over Cat6 with IR Remote

 

Product Description

 IR Remote HDMI Extender 60m as HNE060RA11, Uses single UTP LAN cable CAT5e/6 to substitute HDMI cable to achieve long distance transmission, The transmission distance extend up to 50 meters under 1080P. And build in EDID analyses module, user can update the EDID by the button of READ, to fit in different display devices. In the same time, this extender can support infrared control signal pass through function. Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
 

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.