Wholesale FTDI FT232RL USB RS485 to RJ11 RJ12 6P4C 6P6C RS485 Serial Console Programming Cable
Product: USB serial converter cable
Connector: USB 2.0 A Male / RJ11 RJ12 6P4C 6P6C
Chipset: Original UK FTDI/FT232RL chip
Length: standard 1.8m or customized
Application: router, switch, firewall, CNC Program, bar coder reader, scanner, etc
Output Signals: Orange-DATA A(+),Yellow-DATA B(-),Black-GND,Red--VCC(5V),Brown-Terminator 1,Green-Terminator 2 or optional
Specification:
• Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
• Data transfer rate up to 230.4 Kb/s
* CE RoHS compliance
| Product name |
Original Ftdi Chip Usb-Rs485-We-1800-Bt Usb To Serial Port Rs485 Communication Control Cable |
| Cable type |
FTDI cable |
| Length |
1m 1.8m customization |
| Certification |
CE RHOS |
| OEM ODM |
accept |
| FT232RL features |
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
FTDI drivers download link:
http://www.ftdichip.cm/Drivers/VCP.htm
Driver installing guide:
http://www.ftdichip.cm/Support/Documents/InstallGuides.htm
FT232RL chip datasheet: |
ftdi usb rs485 cable, compatible usb rs485 we 1800 bt
half duplex, non isolated
Standard 10k pull up & down resistor, 120R terminal resistor
usb2.0 standard, full speed 12M support
On-board signals: Data+, Data-, VCC5V, GND
ft232rl chip for USB UART signals, and SP485LEEN for UART to RS485 signals shift
6 core, 26AWG, bare copper, PVC jacket, OD5.0mm
24AWG wire not suitable for RJ45/rj12 etc
1.8mtr in length
Compatible with ftdi usb-rs485-we-bt signals
Detailed Images
Introduction
The USB 2.0 to RS485 Cable provides a simple and easy to connect between the USB and RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS485 ports expansion via USB ports.
USB to RS485 industrial intelligent converter,no power supply needed,plug-and-play
USB485 is a kind of USB to RS485 industrial intelligent converter. It is the best solution for the communication between USB and RS485. Compared with RS232 to RS485 converter, USB to RS485 converter has many advantages.
Product Features
RS-485 interfaces supported.
RS-485 interface DB PIN connector .
Maximum RS-485 cable length: 1200m
Transmission rate 300bps to 1Mbps.
Maximum number of devides in the RS485
network:Half Duplex to 32 devices
Remote wake-up and power supply management supported.
+/-15KV ESD Protect.
Direct USB power without external power supply.
Working environment: -40 deg.C to 85 deg.C, relative humidity 5% to 95%.
Windows95/98/2000/XP and NT-IMAG supported.
Introducing the USB RS485 to Rj11 Rj12 6p4c 6p6cft232rl USB RS485 Serial Console Programming Cable, the ultimate solution for seamless connectivity between your devices. This cable is designed to provide a reliable and efficient connection between your USB port and Rj9 adapter, Ftdi 232 485 cable, or console cable.
Crafted with precision and attention to detail, this cable boasts a robust construction that ensures durability and longevity. It is made from high-quality materials that are resistant to wear and tear, ensuring that it can withstand the rigors of daily use.
The USB RS485 to Rj11 Rj12 6p4c 6p6cft232rl USB RS485 Serial Console Programming Cable is easy to use and requires no additional drivers or software. Simply plug it into your USB port and connect it to your device, and you're good to go.
This cable is perfect for a wide range of applications, including programming, data transfer, and console access. It is compatible with a variety of devices, including computers, laptops, routers, switches, and more.
In conclusion, if you're looking for a reliable and efficient cable that can provide seamless connectivity between your USB port and Rj9 adapter, Ftdi 232 485 cable, or console cable, look no further than the USB RS485 to Rj11 Rj12 6p4c 6p6cft232rl USB RS485 Serial Console Programming Cable. With its robust construction, easy-to-use design, and wide range of applications, it is the perfect choice for professionals and enthusiasts alike.
){kind=link}
){kind=link}