Ftdi Driver USB to RS485 Adapter Converter Interface Dongle Cable Compabile USB-232r-1800-We

Product Description

1.8M USB-RS485-WE-1800-BT, USB RS485 Converter (With LED signal transmission light) Chip: 100% Geniune FTDI chipset guaranteed ! FT232 USB RS485 cable Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog3.5 Support FTDI VCP driver and D2XX driver Pin Assignments: Black-GND; Yellow-Data -; Red-VCC; Brown-Terminator ; Orange-DATA +; Green-Terminator 2 we can customized the pinout as buyer message . thanks Package : PE bag, then in carton

 

6ft Usb-rs485-1800-bt Ft232 Usb Rs485 6 Core Wire End Cable FT232R USB RS485 Converter,Panel Mount FTDI USB to RS485 Cable Conveter/USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Mac 1.5 Feet
Product Description
 FTDI USB-RS485-WE-1800-BT CABLE, USB TO RS485 SERIAL, 1.8M, WIRE END
FTDI Chip usb to RS485 Cable with TX/RX LEDs 6ft to wire end adapter USB-RS485-WE compatible rs485 adapter cable with driver
USB-RS485 converter cable provides a USB to RS485 serial interface with customized end connectors. Entire USB to RS485 translation protocol handled by the electronics in the cable
ESD Protection for RS-485 I/O's ±15kV Human Body Model (HBM) ±15kV EN61000-4-2 Air Gap Discharge ±8kV EN61000-4-2 Contact Discharge
EIA/TIA-485 communication interface with low power requirements. FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions
Visual indication of Power and Tx/Rx data traffic via LEDs in the transparent USB connector
Every cable is built to last for years with high quality industrial grade materials.
The cable works with all Windows and Mac OS versions including the latest Windows 10 and Mac OS X 10.12(Sierra).
The USB-RS485 cable is a USB to RS485 levels serial UART converter cable incorporating FTDI's FT232R USB to serial UART interface IC device which handles all the USB signaling and protocols.
The cable provides a fast, simple way to connect devices with an RS485 interface to USB.
This cable has 6 outputs: GND(Black), Data-(Yellow), 5vPower(RED), Terminator1(Brown), Data+(Orange), Terminator 2(Green).
In the cable, there is a 120R terminal resistor resistor connected in between Terminator 1 and Terminator 2.

Processor	FTDI FT232RL
RS485 Interface	Included screw terminal header / single wires
Fail-safe bias resistors	Yes
USB interface	Standard Type A Male
Ports	1-port available for RS485
Signals	RS485, 2-wire half duplex: D+, D-, GND
Baud rate	300-921.600bps (up to 3kbps by using alising)
TX / RX buffer size	256 Byte Transmit Buffer / 128 Byte Receive Buffer
Adjustable USB transfer sizes for TX and RX	From 64 bytes to 4096 bytes
Adjustable latency timer	1 to 255 msec
Adjustable read and write timeouts	0 to 10000 msec
Flow Control	None, Xon/Xoff, Hardware
COM port accessible by	Included virtual COM port drivers or FTD2XX.DLL
Special features	Compatible with Modbus RTU/ASCII, BACnet
	Supports non-standard baud rates
	Automatic Send Control
Electrostatic (ESD) protection	600W surge protection, 15KV static electricity protection
Current draw	Static: less than 80mA. Dynamic average: less than 150mA
Interface compliance	USB1.1,2.0,3.0, EIA/TIA RS-232

Package: 1 x usb rs485 FTDI cable
Detailed Images
FAQ
 Converter USB Cable to RS485/USB 2.0 to RS485/RS422 Serial Converter Adapter FTDI Chipset for WinXP/7/8/10, Mac, Linux, Android/USB-RS485-WE-1800-BT, FT232 USB RS485 for Win 10, Win 8, Android, mac Ttl Uart Serial CableUSB-RS485-WE-1800-BT, FT232 USB RS485 for Win 10, Win 8, Android, mac Ttl Uart Serial Cable/ftdi   usb rs485 to rj11 cable,RJ45,8P8C,10P10C
Our Services
 

ftdi usb rs485 cable, compatible usb rs485 we 1800 bt
half duplex, non isolated
Standard 10k pull up & down resistor, 120R terminal resistor
usb2.0 standard, full speed 12M support
On-board signals: Data+, Data-, VCC5V, GND
ft232rl chip for USB UART signals, and SP485LEEN for UART to RS485 signals shift
6 core, 26AWG, bare copper, PVC jacket, OD5.0mm
24AWG wire not suitable for RJ45/rj12 etc
  1.8mtr in length
Compatible with ftdi usb-rs485-we-bt signals
 
Detailed Images
Introduction
The USB 2.0 to RS485 Cable provides a simple and easy to connect between the USB and RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS485 ports expansion via USB ports.
 
USB to RS485 industrial intelligent converter,no power supply needed,plug-and-play
USB485 is a kind of USB to RS485 industrial intelligent converter. It is the best solution for the communication between USB and RS485. Compared with RS232 to RS485 converter, USB to RS485 converter has many advantages.
 
 
Product Features
RS-485 interfaces supported.
 RS-485 interface DB PIN connector .
 Maximum RS-485 cable length: 1200m
 Transmission rate 300bps to 1Mbps.
 Maximum number of devides in the RS485
   network:Half Duplex to 32 devices
 Remote wake-up and power supply management supported.
 +/-15KV ESD Protect.
 Direct USB power without external power supply.
 Working environment: -40 deg.C to 85 deg.C, relative humidity 5% to 95%.
 Windows95/98/2000/XP and NT-IMAG supported.

Introducing the Ftdi Driver USB to RS485 Adapter Converter Interface Dongle Cable Compatible USB-232r-1800-We, the ultimate solution for seamless data communication between USB and RS485 devices. This high-quality adapter converter interface dongle cable is specifically designed for professional use, making it the perfect choice for businesses operating in various industries.

With the Ftdi Driver USB to RS485 Adapter Converter Interface Dongle Cable, you can effortlessly connect your USB-enabled devices to RS485 networks, ensuring efficient and reliable data transmission. Whether you need to connect industrial equipment, automation systems, or other RS485 devices, this adapter converter interface dongle cable is the ideal tool to streamline your operations.

Featuring advanced Ftdi driver technology, this adapter converter interface dongle cable guarantees exceptional performance and compatibility. It effortlessly converts USB signals to RS485 signals, allowing for seamless communication between different devices. The Ftdi driver ensures stable and reliable data transmission, minimizing the risk of errors or data loss.

The USB to RS485 Cable USB RS485 is designed with convenience in mind. Its compact and lightweight design makes it easy to carry and install, ensuring hassle-free connectivity wherever you go. The cable is also durably constructed, ensuring long-lasting performance even in demanding environments. Its high-quality materials and robust construction make it resistant to wear and tear, providing you with a reliable and durable solution.

This USB to RS485 adapter converter interface dongle cable is compatible with a wide range of devices, making it a versatile choice for businesses. It supports various operating systems, including Windows, Mac, and Linux, ensuring compatibility with your existing infrastructure. Additionally, it is plug-and-play, eliminating the need for complex installations or additional drivers.

In conclusion, the Ftdi Driver USB to RS485 Adapter Converter Interface Dongle Cable Compatible USB-232r-1800-We is the perfect solution for businesses seeking seamless and reliable data communication between USB and RS485 devices. Its advanced features, compatibility, and durability make it the ideal choice for professionals in various industries. Upgrade your connectivity and streamline your operations with this high-quality adapter converter interface dongle cable.