RS485 communication cable,telecommunication cable for communication network/
FTDI USB RS485 Adapter Cable RS485 to USB Converter
FTDI USB RS485 CONVERTER CABLE, USB TO RS485 SERIAL WIRE END WIN8 WIN10 ANDROID
USB RS485 adapter
USB2.0. full speed 12M support
FT232 USB RS485 cable, signals compatible with USB-RS485-WE-1800-BT
With 2 LEDs for data+, data- transfering
Red-VCC(5v),Black-GND,White - Data+, Green - Data-
FT232RL + SP485LEEN chip
Support Android, Support Win 10, 8,8.1, Win 7, XP, 2000, Linux, Mac OS
Integrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5
Support FTDI VCP driver and D2XX driver
Half duplex, non-isolated
300 ~ 1Mbps baud rate
Up to 5km distrance transfering
1.8mtr in length.
ABS USB housing, openable for testing
100% double test
PE zipper lock bag for each
ftdi usb rs485 cable, compatible usb rs485 we 1800 bt
half duplex, non isolated
Standard 10k pull up & down resistor, 120R terminal resistor
usb2.0 standard, full speed 12M support
On-board signals: Data+, Data-, VCC5V, GND
ft232rl chip for USB UART signals, and SP485LEEN for UART to RS485 signals shift
6 core, 26AWG, bare copper, PVC jacket, OD5.0mm
24AWG wire not suitable for RJ45/rj12 etc
1.8mtr in length
Compatible with ftdi usb-rs485-we-bt signals
The USB 2.0 to RS485 Cable provides a simple and easy to connect between the USB and RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS485 ports expansion via USB ports.
USB to RS485 industrial intelligent converter,no power supply needed,plug-and-play
USB485 is a kind of USB to RS485 industrial intelligent converter. It is the best solution for the communication between USB and RS485. Compared with RS232 to RS485 converter, USB to RS485 converter has many advantages.
RS-485 interfaces supported.
RS-485 interface DB PIN connector .
Maximum RS-485 cable length: 1200m
Transmission rate 300bps to 1Mbps.
Maximum number of devides in the RS485
network:Half Duplex to 32 devices
Remote wake-up and power supply management supported.
+/-15KV ESD Protect.
Direct USB power without external power supply.
Working environment: -40 deg.C to 85 deg.C, relative humidity 5% to 95%.
Windows95/98/2000/XP and NT-IMAG supported.