FT232h High-Speed Multifunction Module USB to Jtag Uart/Fifo Spi/I2c Module

• Customization: Available
• Application: Local Communication Cable, Coaxial Cable, LAN Cable, Fiber Optic Cable, Long Distance Symmetric Cable, RF Cable, Submarine Cable
• Conductor Material: Copper
• Model NO.: JTAG UART/FIFO SPI/I2C
• Cover Material: PE
• Type: 6pin Header with Open Wire
• Material Shape: Round Wire
• Conductor Type: Stranded
• Wire Core Material: Tinned Wire
• Certification: CE, RoHS
• Model: I2c
• Brand: Kangyuda
• Transport Package: PP Bag
• Specification: 1.8m length with chipset
• Trademark: Kangyuda
• Origin: China
• Production Capacity: 600000
• Package Size: 12.00cm * 13.00cm * 19.00cm
• Package Gross Weight: 1.000kg

Product Description

• FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC.USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
• It has the capability of being configured in a variety of industry standard serial or parallel interfaces.
• Entire USB protocol handled on the chip. No USB specific firmware programming required.
• Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
• UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).

Product details

• Specifications:
  USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
  USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
  Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
  CPU-style FIFO interface mode simplifies CPU interface design.
  Fast serial interface option.
  FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  Adjustable receive buffer timeout.
  
  Typical Applications:
  Single chip USB to UART (RS232, RS422 or RS485)
  USB to FIFO
  USB to FT1248
  USB to JTAG
  USB to SPI
  USB to I2C
  USB to Bit-Bang
  USB to Fast Serial Interface
  USB to CPU target interface (as memory)
  
  Note:
  Manual measurement, with small error. Please check size in detail before purchase.
  Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
  
  We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
  
  Package Includes: 1Pcs

tech PL2503 Hi-Speed USB 2.0 to Serial DB9 cable 3ft

 

This caratar USB to RS-232 Serial Adapter provides an external plug & play RS-232 serial connection with your computer, letting you free up your existing serial port. Users have the capability to utilize the adapter with serial port
interface in an easy-to-use environment. The adapter is designed for connections to Cellular Phones, PDAs, Digital Cameras, Modems, or ISDN Terminal Adapters through USB port .
This cable use the original PL2503 chipset with flash embedded.
PL2503 provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL2503 highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on Serial COM port to easily migrate and be made USB ready. PL2503 can also be installed using the built-in USB CDC-ACM inbox driver in Windows, Mac, Linux, and Android OS. By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL2503 is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. The flexible baud rate generator of PL2503 can be programmed to generate any rate between 75 bps to 12M bps.

PL2503 also implements a USB Mass Storage Device (MSC) class with on-chip embedded flash memory to eliminate the need for a CDROM disc to store user files and programs. Aside from the Virtual COM Port, the theon-chip embedded memory of the PL2503 composite device can also emulate a USB mass storage drive to store the CDC-ACM INF file for Windows installation. The PL2503 also provides an SPI interface for external SPI Flash memory to store larger size software programs and driver installer files. If the external SPI Flash is detected, the emulated mass storage device will automatically display the contents stored inside the SPI Flash instead of the on-chip embedded memory. This feature allows the customer end-product to be environmental-friendly and cost-effective.

Quantity(pieces)	1 - 1	>1
Lead time (days)	15	To be negotiated

00:01Product Paramenters

1. Single-chip Hi-Speed USB 2.0 to Serial data transfer interface;
2. Fully Compliant with USB 2.0 specification(Hi-Speed Mode);
3. Implements USB protocol composite device:
*Communication Device Class (CDC) -Abstract Control Model (ACM) subclass for virtual COM port;
*USB Mass Storage Device Class (MSC) for file storage;
4. Driver Support:
*Built-in USB CDC-ACM class inbox driver in Windows1, Mac, Android, and Linux;
*Prolific CDC-ACM royalty-free driver for chip full-feature support (Virtual COM Port, GPIO control, faster baud rate, etc.);
5. On-chip 24KB embedded Flash
*For writing and storing custom device startup configuration like USB VID/PID, Serial Number, Product String, and other device configurations;
*For storing Windows INF/Readme files;
6. Embedded Flash or external SPI Flash can emulate as USB mass storage drive to access stored read-only user files;
7. Four General-Purpose I/O (GPIO) pins for user-defined application;
8. Supports USB to RS232 Serial UART interface:
*Full-duplex transmitter and receiver (TXand RX);
*Six MODEM control pins (RTS, CTS, DTR, DSR, DCD, and RI);
*5, 6, 7, or 8 data bits;
*Odd, Even, Mark, Space, or None parity mode;
*One, one and a half, or two stop bits;
* Parity error, frame error, and serial break detection;
*Programmable baud rate from 75bps to12Mbps;
*External RS232 driver power-down control.