IR 20kHz-60kHz HDMI Wireless Transmitter and Receiver

• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Product Name: VGA Video Extender Kvm Extender Sender and Receive
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: extender
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

new product private design IR 20KHz-60KHz HDMI wireless transmitter and receiver
This HDMI KVM extender consists of low time-delay wireless HD audio video Transmitter(TX) and wireless Receiver(RX). TX is a wireless audio and video stream transmitting device. It can transmit the HD audio video stream( such as computer, Blue-ray, DVA, Game signal(Xbox, Playstation)) by Wifi format. RX is a wireless audio and video stream receiving device. It can receive the audio video stream signal by Wifi from TX, and play at time, display HDMI signal. And support USB/ IR return function between RX and TX.

 300M VGA KVM Extender

VGA KVM Extender uses single UTP LAN cable CAT5e/6 to substitute VGA cable to achieve long-distance transmission.
The transmission distance extends up to 300 meters under 1920*1200@60Hz. Support EDID pass though, best compliant with different display devices.

Hot Selling VGA Video Extender KVM Extender Sender and Receiver over Cat5e up to 300m

VGA KVM Extender  uses single UTP LAN cable CAT5e/6 to substitute VGA cable to achieve long distance transmission, the transmission distance extend up to 300 meters under 1920*1200@60Hz. Support EDID pass though, best compliant with different display devices. 

Features

1. Use single UTP LAN cable (CAT5e/6,should follow EIA/TIA 568B Standard) to substitute VGA cable to achieve long distance transmission (up to 300 meters)
2. Resolution up to 1920*1200@60Hz
3. With smart brightness and contrast adjustment algorithm, easy to adjust 0-15 gain levels to match 0-300 meters UTP cable
4. Smart gain control, effective for common mode noise suppression, keep high fidelity picture quality even by 300 meters transmission.
5. 8KV ESD protection
6. Easy to control PC remotely with transmitting keyboard and mouse data
7. EDID pass through, compatible with most display devices

 

Product pannel:

Connection Diagram:

 

 

1080p Many to Many KVM RX TX HDMI Fiber Extender 120m over IP

120M HDMI KVM Many to Many Over IP Extender w/ IR

The 120M HDMI KVM Many to Many Over IP Extender with IR (HKE12MMA10) , support USB keyboard and mouse data, IR signal transmitted over a LAN (Local Area Network).

Features

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
 

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.