HDMI Fiber Extender 20km HDMI Extender with IR

• Customization: Available
• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Model NO.: extender
• Product Name: Splitter,Extender,Matrix,Switch
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

This HDMI fiber extender can extend HD signal up to 20km over SC  fiber cable.  This 20km HDMI fiber extender use the single mode fiber cable. And show the HD image, the resolution up to 1080p. You can control this extender by RS232 and IR. 
 IR Remote HDMI Extender 60m as HNE060RA11, Uses single UTP LAN cable CAT5e/6 to substitute HDMI cable to achieve long distance transmission, The transmission distance extend up to 50 meters under 1080P. And build in EDID analyses module, user can update the EDID by the button of READ, to fit in different display devices. In the same time, this extender can support infrared control signal pass through function. Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

 

Specification:

Product name	20km fiber HDMI extender
Power adapter	DC 5V
HDMI DDC voltage	5Vp-p
HDMI TMD bandwidth	10.2Gpbs
HDMI resolution	480i@60Hz, 480p@60Hz, 576i@50Hz, 576@50Hz, 720p@50Hz/ 60Hz, 1080i@50/60Hz, 1080p@50Hz/ 60Hz
HDMI output	480p@60Hz, 576@50Hz, 720p@50Hz/ 60Hz, 1080p@50Hz/ 60Hz
Fiber center wave length	1310nm
Fiber connection port	SC
Optical fiber type	Single mode 0-20km
Fiber link loss	≤14db
Fiber Receiver sensitivity	≤ -32dbm
Fiber output power	≥ -11dbm
Fiber return loss	15db
IR remote	support 38kHz

 

Features

1.Use single UTP LAN cable (CAT5e/6) to substitute DVI cable to achieve long distance transmission (up to 50 meters)

2.Resolution up to 1080P@60Hz and 1080P 3D

3.Up to 2.25Gbps data rate

4.lossless compressed digital audio: True HD, DTS-HD Master Audio etc.

5.8KV ESD protection

6.adaptive equalization and signal enhancement processing

7.Support EDID pass through, compatible with most display devices

8.Infrared control signal pass through function 

9.USA Imported CPU, stable and good quality

10.1080P Full HD Signal Transmission, extend up to 60m over single CAT5e/6

 

Product pannel:

Connection Diagram:

 

 

1080p Many to Many KVM RX TX HDMI Fiber Extender 120m over IP

120M HDMI KVM Many to Many Over IP Extender w/ IR

The 120M HDMI KVM Many to Many Over IP Extender with IR (HKE12MMA10) , support USB keyboard and mouse data, IR signal transmitted over a LAN (Local Area Network).

Features

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
 

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.