2 Port Auto HDMI Kvm Switch Support USB2.0 Device

• Customization: Available
• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Model NO.: kvm
• Product Name: VGA LCD Kvm Console Switch
• Key: Switch Switcher Kvm 4K Video Splitter HDMI Switch
• Words: Kvm Switch Rack 8 Port VGA LCD Kvm Switch
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

Oem ODM Kvm Switch Kvm Switch   350Mhz 2- 32 Port Auto Vga Rackmount Usb2.0 Kvm Switch 
 

Product Description

This 2x1 HDMI KVM Switcher provides you with great flexibility in integrating cross-platform computer equipment easily. It makes you available to switch easily and reliably between any HDMI computers using one HDMI compliant display.

The 2x1 HDMI KVM Switcher supports USB 2.0 hub and USB 2.0 keyboard /mouse. By using USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode scanner or other USB devices to the KVM. Switching can be controlled through variable methods, such as the front panel source selector buttons, IR signals and hot keys on keyboard.

Features

• Using one USB console controls two HDMI computer equipments
• Support Unix /Windows /Debian /Ubuntu /Fedora /Mac OS X /Raspbian /Ubuntu for Raspberry Pi and other Linux based system
• Support hot plug, connect or disconnect devices to the KVM switch in any time and without turn off devices
• Support auto switching to monitor computers in a specified time interval
• Support hot key commands and mouse gesture to switch inputs.
• Support front panel buttons, IR signals, keyboard hot keys to control KVM switch.
• Support keyboard and mouse smooth switch, no delay is introduced after switch channel.
• Support resolution up to 3840*2160@30Hz
• With extra standard USB 2.0 hub port, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM just as you have plug these devices directly to computer.
• Supports DVI-D single link sources and displays with the use of HDMI-to-DVI adapters.

Functionality:

Auto Scan

Yes

Port selection

Front panel buttons

Yes

Keyboard hotkeys

Yes

IR remote control

Yes

Mouse gesture

Yes

Console commands

No

Technical:

Resolution

Up to 3840x2160@30Hz

HDMI 

Yes

HDCP 

Yes

Auto to get EDID

Yes

Video bandwidth

3 Gbps

Auto scan interval

1~250 Seconds

Beep Sound

On/Off

OSD

No

Supported OS

Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/ Raspbian /Ubuntu for Raspberry Pi and other Linux based system

Console ports

Keyboard emulation

1 * USB Type A

Mouse emulation

1 * USB Type A

USB 2.0 Hub ports

1 * USB Type A

Video /Audio

1 * HDMI Type A

RS232

NA

LAN

NA

System ports

USB Data

2 * USB Type B

Video / Audio

2 * HDMI Type A

ESD protection

Human body model - ±8kV (Air-gap discharge)

Mechanical:

Chasing material

Aluminum Alloy

 

 

Packaging list

1 * 2x1 HDMI KVM Switcher

1 * DC 5V Power Adapter

1 * IR Remote Control

1 * Quick-Start Guide

(CE FCC  2 Port Auto HDMI KVM Switch Support USB2.0 Device)

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.