| Material: | Plastic |
|---|---|
| Interface Type: | USB 2.0 |
| Degree of Innovation: | Innovative |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Duplex converting serial rs232 to 485 usb to rs485 converter adapter/FTDI usb to rs485 usb-485 converter adapter cable for win 8
2 Compact high performance solution.
3.Indication LED lights for TX, RX and Power.
4.Interface: Terminal header + stripped wires.
5.Automatic Send Control.
6.Up to 32 nodes in network configuration. Professional Manufacturer
USB to RS485 Converter, USB RS-485 A male to open cable with FTDI chip
USB to RS485 Compact FTDI Converter with Terminal Screw OR named USB to rs485 uart serial converter adapter
The processor chip in this converter cable is the high performance FTDI chip which is compatible with all versions of Windws (32- and 64-bit), Mc and Linux Compact USB to RS-485 converter cable with the chipset built into the USB connector. This desgn offers a convenient way of connecting your RS485 devices directly to the RS485 wires of this 485 converter cable or via the a two-piece screw terminal connector for easy disconnection.
Besides the RS485 D+, D- and GND signals this converter cable also provides an addtional +5VDC at the 485 end which can be used for powering your device if needed.
The cable itself is powered from the USB port so no additional external power supply is needed for this RS 485 converter to work.
After connecting and installing the drivers for this cable a virtual COM port is automatically created and will show up in your operating system's Device Manager just as if it was a real local COM port.
This USB to 485 converter is surge and static protected to protect against the most common damages from static electricity and other voltage spikes, which makes it suitable for most applications, including industrial, commercial and any general office environment.
Automatic send data control is enabled by default so no external flow or handshake control is needed.
| SPECIFICATIONS | |
| Part number | UC-USB-RS485-WE-1800-BT |
| Operating system |
|
| Processor | FTDI FT232R |
| Unique chipID no. | Yes, each converter has it own unique ID numberwhich can be accessed by the user with the D2XX driver programmers guide. |
| RS485 Interface | Included screw terminal header / single wires |
| Echo signal | None |
| Fail-safe bias resistors | Yes |
| USB interface | Standard Type A Male |
| Ports | 1-port available for RS485 |
| Signals | RS485, 2-wire half duplex: D+, D-, GND |
| Baud rate | 300-921.600bps (up to 3kbps by using alising) |
| Parity | None, Odd, Even, Mark, Space |
| Data Bits | 7, 8 |
| Stop Bits | 1, 2 |
| TX / RX buffer size | 256 Byte Transmit Buffer / 128 Byte Receive Buffer |
| Adjustable USB transfer sizes for TX and RX | From 64 bytes to 4096 bytes |
| Adjustable latency timer | 1 to 255 msec |
| Adjustable read and write timeouts | 0 to 10000 msec |
| Flow Control | None, Xon/Xoff, Hardware |
| COM port accessible by | Included virtual COM port drivers or FTD2XX.DLL |
| Special features |
|
| Electrostatic (ESD) protectin | 600W surge protectin, 15KV static electricity protectin |
| Current draw | Static: less than 80mA. Dynamic average: less than 150mA |
| Interface compliance | USB1.1,2.0,3.0, EIA/TIA RS-232 |
| Regulatory compliance | FCC, CE and RoHS |
| Working temp | -20°C to 60°C |
| Cable length | 1.8m |
| Size | 50 x 8 x 18mm (USB part only) |
| Warranty | 1 year limited warranty |
Standard packaging size: 43.5*34*21cm
200pcs in one carton
Customised packing and length based on the quantity
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}