Sc Interface Tx Rx EMI Technology Optical 20km HDMI Fiber Extender

• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Product Name: Cat5e/6 UTP to 120m HDMI Kvm Many to Many Over IP
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: extender
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

Oem ODM 20Km Sc Fiber Optic Transmission 1920X1080P Uncompressed Hdmi Signal Transmitter And Receiver
 

Brief introduction:

 

20Km optical fiber HDMI extender by using optical fiber to send high definition audio and video signal over 

large distance,overcoming the limited length restriction of stander HDMI cables.

 

Product feature

 

1.Extend hdmi signal to 20KM by one optic fiber;
2.HDMI+IR+RS232 extender
3.Signle Mode SC interface optical fiber transmission technology;
4.IR and fiber sync-transmission;
5.Unique EMI Technology

 

Specifications

Item	20Km optical fiber extender
Power adapter	DC5V
HDMI	DDC voltage	5Vp-p(TTL)
	TMD bandwidth	10. 2Gpbs
	HDMI	480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz, 720p@50/60Hz,1080i@ 50/60Hz,1080p@50/60Hz
	HDMI output	480p@60Hz,576p@50Hz, 720p@50/60Hz,1080p@ 50/60Hz
Optical fiber	Center wave length	1310nm
	Connection port	SC
	Optical fiber type	Single mode 0-20km
	Link Loss	≤14dB
	Output power	≥-11dBm
	Receive sensitivity	≤-32dBm
	Return loss	15dB
IR remote	Support 38kHz
Power consumption	TX:5W RX:5W
Dimension	10.5*9.3*2.9cm

 

Product pannel:

Connection Diagram:

 

The 120M HDMI KVM Many to Many Over IP Extender with IR   HDMI, USB and IR over a LAN (Local Area Network). 

 

Supports resolution up to 1920*1080P Full HD. Source content can be transmitted from one transmitter to several receivers (Up to 253  receivers) over LAN, and the transmitter can be controlled by either of the receivers in the same LAN over IR or USB keyboard and mouse.

Features

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
Package Type:
1 * HDMI KVM Extender transmitter
1 * HDMI KVM Extender Receiver
1 * IR transmitter Cable
1 * IR Receiver Cable
2 * DC 5V 1A Power Adapter
1 * Quick-Start Guide

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.