Digital 4 Channel Optoelectronic Isolation I/O Controller

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: Integrated Wiring
• Model NO.: Transceiver
• Certification: CE, RoHS
• Condition: New
• Name: Isolation I/O Controller
• Product: Modbus Mqtt Industrial Data Acquisition Device
• Featured: Ethernet Device I/O Port Device
• Solution: 4 6 8 Wire 3.5kv dB9 Male to Female M F Serial Op
• Transport Package: Customized
• Specification: customized
• Trademark: Kangyuda
• Origin: China
• Production Capacity: 600000
• Package Size: 12.00cm * 13.00cm * 16.00cm
• Package Gross Weight: 1.000kg

Product Description

 Digital 4 channel optoelectronic isolation  I/O controller

Product Description

 

Four-channel photoelectric isolation voltage input and four-channel photoelectric isolation relay output

 Working power supply: 9-30VDC/350mA

Isolation voltage: 2500V RMS

Four-channel photoelectric isolation voltage input: 0-24V

Maximum contact capacity (DC) : 110VDC 0.3A 30VDC 1A

Maximum contact capacity (AC) : 5-250VAC(47 ~ 63Hz)

Electrical interface: ten bit terminal

Dimensions: 120mm×80mm×25mm

Use environment: -40ºC to +85ºC, relative humidity of 5% to 95%

Suitable for all the communication software used, plug and play

Second-ranking supports DOS/Linux to WIN95 / WIN98 / WIN2000 / NT/XP, etc

The UT-5510A Optoelectronic Isolated Data Parallel Input/Output I/O Controller is an 8-bit 4-channel data input and 8-bit 4-channel data output. Each data input or output channel is similar to several computer interfaces.The module can be controlled remotely by a series of instructions of Modbus-RTU protocol. The module and the upper computer communicate through RS-485 serial bus in the form of instruction data.The communication baud rate is software-able and the transmission rate is up to 115200bps.

The M120T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance

Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and

other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically

measurement and control system.

 

The M120T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital

outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O

data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

 

The M120T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports max. 10MHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA

analog signal, 4 digital outputs, supports 10Hz~300KHz high speed pulse output or relay outputs, 2 channel 12bits analog outputs, supports 0~10VDC signal output. All of the I/O with high sampling frequency

and special filtering strategy to ensure it's reliable.

 

 

 

 

Features:

uEmbedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

uWide range power supply 24 ~ 36VDC with over voltage and phase-reversal protection;

uEmbedded Web server for configuration and management;

u Support Web realtime monitoring and Web debugging;

  u DO1 support PWM output;

 

uIntegrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

u4 optical isolated digital input, supports max. 10MHz high speed pulse counter;

u4 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

u4 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;

u2 analog output, 12-bit resolution, supports 0-10VDC;

uHigh sampling frequency and special filtering strategy to ensure reliability;

u1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

uSupports register mapping function and extend I/O inquiry strategy;

uProvides 1 channel 24~36VDC power source output for external device, saving wiring cost;

uLED instructions work status, with reset button to reset, easy on-site installation and commissioning;

uUsing metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

uSmall size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

 

 

M120T Specifications

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC =1 • Off: 0 to 3 VDC=0
Counter Frequency	10MHz(Only the 1^st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Digital Output
Type	Sink or Relay
I/O Mode	DO or Relay or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1^st Channel can be used as high speed pulse outputs)
Over-Voltage Protection	50 VDC
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
Isolation	If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation.
• Analog Input
Type	Differential input
Resolution	12 bits
I/O Mode	Voltage / Current (jumper selectable)
Input Range	0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C
Sampling frequency	20Hz
Isolation	Electrical isolation
• Analog Output
Type	Differential input
Resolution	12 bits
Output Range	0 to 10 VDC
Drive Current	1A (max.)
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C
Isolation	No
• Working Power Requirements
Input Voltage	24 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	24 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Introducing the Digital 4 Channel Optoelectronic Isolation I/O Controller, a cutting-edge solution designed to meet the diverse needs of businesses in various industries. This state-of-the-art controller offers unparalleled functionality and reliability, making it an essential tool for any B2B platform.

As the name suggests, this controller is equipped with four channels, providing users with ample flexibility and control over their digital input and output operations. Whether you require precise control over industrial machinery or need to monitor and manage multiple devices simultaneously, this controller has got you covered.

One of the standout features of this controller is its optoelectronic isolation technology. This advanced technology ensures that the input and output signals are electrically isolated, preventing any interference or damage to the connected devices. This not only enhances the overall safety of your operations but also extends the lifespan of your equipment, saving you valuable time and resources.

The Digital 4 Channel Optoelectronic Isolation I/O Controller is designed with the utmost precision and attention to detail. Its sleek and compact design allows for easy installation and integration into existing systems. Additionally, the controller is compatible with a wide range of devices and protocols, making it a versatile choice for businesses operating in diverse environments.

With this controller, you can expect seamless communication and control between your devices. The high-speed transmission ensures real-time data exchange, enabling you to make informed decisions and respond promptly to any changes or anomalies in your operations.

Furthermore, this controller is backed by a team of experts who are dedicated to providing exceptional customer support. Whether you have technical queries or require assistance with installation and configuration, our team is always ready to assist you.

In conclusion, the Digital 4 Channel Optoelectronic Isolation I/O Controller is a reliable and efficient solution for businesses seeking enhanced control and safety in their digital input and output operations. With its advanced features, compatibility, and exceptional customer support, this controller is a valuable asset for any B2B platform. Invest in this controller today and experience the difference it can make in optimizing your business operations.