100m Wireless HDMI WiFi Extender with IR

• Customization: Available
• Output: Component signal, SDI, AV, VGA
• Applicaiton: Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
• Model NO.: extender
• Product Name: HDMI Splitter Extender 1X8 Port Over Cat5e/CAT6 Et
• Specification: customization
• Trademark: caratar
• Origin: China

Product Description

100m Wireless HDMI WIFI extender with IR

HDMI extender adopts standard Ethernet TCP/IP protocol, transmit HD signal via WIFI. It supports one to many, with IR expand function make remote controller more convenience. This Wifi HDMI extender has excellent function of image handle and transmit. The HDMI extender makes smooth and stable transmission, is a economic and effective HDMI extender method.

 

Specification:

 

Video	Protocol	HDCP1.2
	Compress format	H.264
	Pixel bandwidth	165MHz, full digital
	Interface bandwidth	Total bandwidth 6.75Gbps
	Resolution	Up to 1920*1080P@60Hz
	Interface	HDMI-A
	Resistance	100Ω
	Recommend the longest HDMI  input and output distance	Less 5 meter when 1920*1080P@60Hz
Infrared	Interface	3.5mm audio inteface
	Signal direction	Single
	Signal format	digital
	Input voltage carrier frequency	38KHz
WIFI	Radio frequency consumption	23 dbm
	Wireless standard	802.11ac
	Signal direction	Single
	Wireless frequency	5GHz
	Transmission distance	100m( open area)
Environment	Power	DC 12V
	Max. consumption	9W
	Operation temperature	-5 ºC to 70ºC
	Operation humidity	5% to 90%

 

Product pannel:

Connection Diagram:

 

 

1080p Many to Many KVM RX TX HDMI Fiber Extender 120m over IP

120M HDMI KVM Many to Many Over IP Extender w/ IR

The 120M HDMI KVM Many to Many Over IP Extender with IR (HKE12MMA10) , support USB keyboard and mouse data, IR signal transmitted over a LAN (Local Area Network).

Features

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
 

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.